C1 Vibration
Transciever
|
 |
Sound
mechanics C1 vibration transceivers are gold plated brass spike
supports designed and tuned to effect a balanced control of unwanted
system vibration. Mechanical grounding and decoupling are employed
in all Sound Mechanics Products. 25mm x 12mm |
$8USD/unit
|
|
| |
|
|
|
|
C2 Vibration
Tranceivers
|
 |
Sound
Mechanics' C2 Vibration Tranceivers are low cost high performance
supports for high fidelity audio equipment including CD transports,
amplifiers and loudspeakers. Each set consists of 3 half cylindrical
specially selected Brazilian hardwood elements which are designed
and tuned to effect a balanced control of unwanted system vibration.
Mechanical grounding and decoupling are employed in all Sound
Mechanics Products. 12x25x30mm
|
10USD/set
of 3
|
|
| |
|
|
|
|
C8 Vibration
Transceivers with particle in-fill
|
 |
Sound
Mechanics' C8 Vibration Tranceivers are low cost high performance
supports for high fidelity audio equipment including CD transports,
amplifiers and loudspeakers. Each set consists of 3 half cylindrical
hardwood with 2 types of particle in-fill extending bandwidth and
improving linearity by mass -and motion -sinking extraneous resonances.
Mechanical grounding and decoupling are employed in all Sound Mechanics
products. 32x45mm |
40USD/set
of 3
|
|
| |
|
|
|
|
JP-2 Jumper
|
 |
A
very high speed and accurate jumper with low incremental distortionSound
Mechanics' JP-2 jumper cables use SM wave guide technology to control
magnetic interference and so lets the ultrafine details through.
Resolution and transient response are improved. These cables are
directional. All wire strands are treated with propietry micro surface
treatment. 8" long (usuable length is 6". 8mm spades |
60USD/set
of 4
|
|
|
|
|
|
|
|