![]() Vacuum Tube Kits By diyhifisupply
|
(Payment
Methods : The following shopping cart system uses Paypal.
For other Payments by Credit Card or Bank Transfer See Here)
|
Not everyone wants refrigerator -sized sub cabinets and most large subwoofers with huge Xmax don't have the agility to keep up with full range and open baffle speaker systems. Dyna-fone does. Designed with a powerful motor to run in a ~30L cabinet, sealed for best transient response. Rigid cast aluminum basket. 10"(260mm) to basket rim edge. Alloy cone. 200/400w program/power. TSP parameters and impedance curve Frequency response here. Sound: Articulate. By keeping the Xmax to 14 mm p-p and using a well-damped non-flexing alloy cone, rigid aluminum basket together with a powerful motor, the Dyna-fone is able to keep up with the fastest open baffle or wide range drivers like the Ciare and Neo-fone but still have serious useable grunt down to 25hz.. You can see from the impedance plot that there are no nasties above 2k and smooth response below. The attached measurement graphs were taken at the factory in an anechoic chamber BUT, as the factory is wont to do, with totally green drivers. We'll take some TSP measurements on a run-in pr in a week or two. As the spider and surrond loosen expect the Fs to go down a bit and efficiency/VAS to go up a bit. $96USD/pc plus shipping air express $80USD/pc most places Europe/North America (7kg each, ouch!) Email to discuss cheaper shipping options (or combined lots of multiple drivers) to your area Together with the Ciare in small open baffle (13 x 14" and the Ciare dual magnet can cover to 70hz, no suckout in the 100-300hz region), plate amp as below for a cheap killer open baffle system. ($96+$149+$110 for a single sub open baffle system). Or can be used with the Neo-fone also in a sealed box for matching transient response ($96x2 + $149x2 + $100 for a dual bass setup with the Neo-fone .) Bass without blur |
playing these now and they sound way too good for their price. Easy to drive; ideal match for Ella, even a 300b amplifier for moderate listing levels.
|
The
best enclosure shape: The
best enclosure material: The
best speaker concept: Best
crossover frequency:
|
|
System Deal: 1 pr Reckhorn S-22 incl.crossover and table mount stand as shown, + 1 pc Dynafone sub woofer driver (can be used in small 30L sealed box) +1 pc A-401 Reckhorn control bass amp $180USD + $249 + 96 USD including ship by surface to Europe, US, and Australia, most destinations. This item is not shipped to Germany $525USD |
|
|
Awesome System Deal: 1 pr Reckhorn S-22 incl.crossover and table mount stand as shown, + 2 pc Dynafone sub woofer driver (can be used in small 30L sealed box) +2 pc A-401 Reckhorn control bass amp $180USD + $498 + 192 USD including ship by surface to Europe, US, and Australia, most destinations. This item is not shipped to Germany $870USD |
|
|
Other Speaker Products NEW: A-401 Subwoofer Plate Amp That Does it All! |
||
Reckhorn Subwoofer Amplifier: This is what we wanted all along. Mounted outside for better cooling and accessibility. There are many cheap plate amps with inflated specs. This is not one of them. German technology shows how it should be done. No guts, no glory! Everything is overbuilt and only the best devices used so that real performance meets and exceeds specs. What parts make good subwoofer amp? Output devices must be capable of current delivery without distortion or sag. The Reckhorn uses 4 x Toshiba devices, 6 x 10000uf caps for on-demand power AND a huge torroid power transformer. Shipping is by airmail to most destinations (email to confirm, 1 to 2 weeks), for express delivery email for rates Taming the bass in any room is a story of peaks and valleys. Get the important 60hz region right but 40hz has a 15db valley then comes charging back +10db at 30hz. And look, there's a 10db hump at 70hz! No problem with the Reckhorn. That valley? Just adjust the boost and waltz that lift anywhere between 20 and 80hz. The peak? Dial in the EQ function to cut it down to size. Boom? Again, adjust the subsonic setting to whip unruly bass into shape. And, 24db roll-off to get out of the way fast. Connections here
|
$249USD/pc + 39USD shipping (note this is surface shipping, allow 4 to 10 weeks) |
|
|
Clearance: A-400 (updated version stable into 2ohms) Subwoofer Plate Amp That Does it All!
Reckhorn Subwoofer Amplifier: This is what we wanted all along. Mounted outside for better cooling and accessibility. There are many cheap plate amps with inflated specs. This is not one of them. German technology shows how it should be done. No guts, no glory! Everything is overbuilt and only the best devices used so that real performance meets and exceeds specs. What parts make good subwoofer amp? Output devices must be capable of current delivery without distortion or sag. The Reckhorn uses 4 x Toshiba devices, 6 x 10000uf caps for on-demand power AND a huge torroid power transformer. Shipping is by airmail to most destinations (email to confirm, 1 to 2 weeks), for express delivery email for rates Taming the bass in any room is a story of peaks and valleys. Get the important 60hz region right but 40hz has a 15db valley then comes charging back +10db at 30hz. And look, there's a 10db hump at 70hz! No problem with the Reckhorn. That valley? Just adjust the boost and waltz that lift anywhere between 20 and 80hz. The peak? Dial in the EQ function to cut it down to size. Boom? Again, adjust the subsonic setting to whip unruly bass into shape. And, 24db roll-off to get out of the way fast. Connections here
|
This is a special clearance price as long as stock lasts. $199USD/pc + 39USD shipping (note this is surface shipping, allow 4 to 10 weeks) |
|
|
Ciare
CH250 full range driver suitable for high efficiency open
baffle
|
$110/pr + 34USD shipping |
|
|
|
|
Email
Diy HiFi Supply
|
![]() |
![]() |
![]() |
![]() |