120mm x 210mm x 330mm (h x l x w)

Power for your projects! The chassis often just doesn't have enough room.

For linestages, phono stages and amplifiers where you want to put the psu in a separate enclosure.
The case is aluminum so easy to work and will not vibrate with the transformer.

The power transformer 115+10 x 2 primaries so good from 115 up to 250v line voltages. Secondaries: 270-225-0-225-270v/150ma; 8v/1.5a; 8v/1.5a; 6.3v/1.5a; 5v/4a
The 8v windings allow the voltage drop needed to use filament supplies or CMC to put out 5-6.5v dc as needed.

The umbilical cable has 8 conductors, 1M length. Power switch is on the IEC receptacle. The tube socket mounting plate fits octal sockets and the case is vented above and below the tube. Excellent for 5Ar4 etc.

There is enough open space to install one of our FCUPS modules, DIY filament supply and still have space to add several 47uf film caps to the filter network. State of the art made easy.

Or add you own choke/cap design. Load on the film caps - there is room.

Package includes;
aluminum cover and chassis, IEC connector with power switch, umbilical cord with 8 conductors and strain relief and bayonet male/female set, 4 feet, power transformer, tube socket mounting plate for octal socket

Want to use your own power transformer? Available as next item below.

shipping weight is 7kg. Some countries may have very inexpensive surface shipping. Enquire for the rates.